Short Description :

TG-5265D Static Gel Strength Analyzer is designed to measure the gel development and static gel
strength of cement slurry samples cured at a simulated down-hole temperature and
pressure. TG-5265D uses the rotating paddle and a stationary cylindrical slurry cup assembly to
condition the cement slurry, by directly measuring the forces required to initiate movement in the
slurry, provides the accurate method to determine the static gel strength of cement slurry.
TG-5265D is equipped with a device for post-test cooling of the instrument. This is an
external-cooling jacket attached to the pressure vessel. After completion of the test, cooling water
may be circulated through this cooling jacket to cool the pressure vessel.

                                                                                                                Static Gel Strength Analyzer, Twin Cell                                                                                                                                  

                                                                                                                                   Model: TG-5265D

TG-5265D twin-cell SGSA is equipped with state-of-art temperature control and data acquisition system that provides unparalleled ease of use for the operator.

TG-5265D dual-cell SGSA has a compact structure: the pressure vessel features its shockproof case-type structure that has undergone years of verification in practice, equipped with a PCB, an industrial microprocessor with superior reliability, special-purpose hardening software, and computer data acquisition system is installed with TG-5270 data acquisition application software.

Characteristics

– Determine static gel strength without destruction
– Under the same experimental conditions, it is possible to collect a group of experimental data in a single test
– Gel value, static gel strength, transit time Pressure and temperature displayed in real time
– Max. temperature 400°F (204°C)
– Max. pressure 130 MPa(40000psi)
– Microprocessor-based automatic temperature controller, digital temperature display In accordance with API specification 10B
– Pressure is controlled by means of pressure release valve
– Power-down data protection
– Heating/cooling jacket
– Utilize TG-5270 data acquisition and control software
– Max. operating indexes have been tested before delivery
– Allowed to simulate low temperature as in deep see by connecting with an external circulating freezer.
– Dimension: 550*1200*550 mm, net weight: 110kg